The MonoLith platform is a scalable architecture with over 622 base configurations — each with its own downloadable datasheet. Instead of a static PDF library, every datasheet is generated live from the PackForge configurator, dialed to the exact voltage, energy, and power your project requires.
Most battery manufacturers publish a handful of fixed configurations. The MonoLith platform is different — it's a parametric architecture where the same module, cell, and enclosure combine in hundreds of ways. A static library can't represent that, so the datasheets are generated on demand, specific to each configuration.
One qualified cell, one structural platform, hundreds of series-parallel arrangements. Every configuration shares the same tested building blocks.
Set your voltage, energy, and power requirements. The configurator shows only the configurations that fit — no scrolling through irrelevant options.
Each datasheet carries the exact part number, electrical specs, mechanical dimensions, and layout for the configuration you selected. No generic specs.
The entire process takes less than a minute. Here's exactly how to navigate the configurator and download the datasheet that matches your project.
Drag the sliders to narrow the field
The configurator opens with every MonoLith configuration visible. Three range sliders across the top let you dial in exactly what you need: voltage range, energy capacity, and discharge power. Drag either thumb on any slider and the grid instantly filters to show only the configurations that fit within your window.
Two ways to find the right configuration
Below the sliders, you have two navigation modes. The card grid shows every matching configuration with key specs at a glance — voltage, energy, power, weight, and cell count. Toggle the spectrum chart to see all results plotted by energy versus voltage, where each dot is a configuration you can click to select.
Open the detail panel for any configuration
Click any configuration card to open a slide-out panel with the complete specification breakdown. You will see electrical parameters (nominal, minimum, and maximum voltage, continuous and peak current), physical dimensions and weight, module layout visualization, and thermal specifications — everything needed to evaluate the fit.
One-click PDF for the exact configuration
Inside the detail panel, the "Download Datasheet" button generates a professional PDF datasheet for that exact configuration — with the correct part number, system-level electrical and mechanical specifications, layout diagram, and performance envelope. The datasheet is generated on the fly, specific to the configuration you selected.
Get the most out of the configurator with these advanced features.
Upload an existing requirements document or specification sheet. The AI engine scores every configuration against your specs and ranks the best matches automatically.
Pin configurations to the comparison dock at the bottom of the screen. See specs side by side and send all pinned configs directly to the RFQ form.
Filter settings are encoded in the page URL. Copy and share a link with your exact voltage, energy, and power window — your colleagues will see the same filtered view.
Found the right configuration? The quote request flow is built into the configurator — no separate form needed. Select your config and click "Request Quote" in the detail panel or comparison dock.
Open the PackForge configurator, set your requirements, and download the datasheet for the MonoLith configuration that fits your project.
Open PackForge Configurator