EBS-LB-1S6P-P28A
High-current 6-cell parallel module built for power-intensive duty cycles. 16.8 Ah at 210 A continuous discharge.
Key considerations when designing this module into your battery system.
M6 studs require 5.5 Nm torque with Loctite 243 (threadlocker). Verify torque with a calibrated wrench.
A pack-level fuse is mandatory. Size the main fuse below 120 % of the cumulative parallel module current rating.
Each module includes isolated NTC thermistors. Connect all thermistors to your BMS for continuous temperature monitoring.
Stack up to 138 modules in series (500 VDC system limit). Maintain proper creepage and clearance for your voltage class.
Each module is 1S — your BMS must monitor cell-group voltage and balance across all series-connected modules.
Multiple modules can be paralleled for increased capacity. Current ratings scale linearly with parallel count.
Browse every configuration. Energy modules maximize capacity; Power modules maximize discharge current.
Our engineering team can help you select the right configuration and design it into your battery system.